| Status |
Mass Production (Preferred) |
| Operating Temp. Range |
-55 to +125 ℃ |
| Rated Voltage |
50 V |
| Rated Capacitance |
330 uF |
| Tolerance at rated capacitance |
± 20 % |
| Leakage current (max) |
165 uA at 2 min |
| Tangent of loss angle (tanδ) (max) |
0.1 |
| ESR (max) |
20 mΩ at 100kHz / 20 ℃ |
| Rated Ripple (max) |
3000 mArms at 100kHz / 125 ℃ |
| Impedance ratio___[-25℃/+20℃] |
1.5 |
| Impedance ratio___[-55℃/+20℃] |
2 |
Endurance (Applied ripple current)
___[Test time] |
8000 hours at 125 ℃ |
| Endurance___[Leakage current] |
The initial specified value or less |
| Endurance___[Capacitance change] |
Within ±30% of initial value |
| Endurance___[tanδchange] |
200% or less of the initial specified value |
| Endurance___[ESR change] |
200% or less of the initial specified value |
| Shelf life___Test time |
1000 hours at 125℃
; Other items are same as the endurance. However, the performance shall be after voltage application treatment (JIS C5101-4). |
| Dimension φD |
φ12.5 ±0.5 mm |
| Dimension L |
13.5 ±0.5 mm |
| Dimension A |
13 ±0.2 mm |
| Dimension B |
13 ±0.2 mm |
| Dimension (C) |
4.9 mm |
| Dimension (P) |
4.6 mm |
| Dimension W |
1 to 1.4 mm |
| Dimension M |
0.7 ±0.3 mm |
| RoHS Compliance (10 subst.) |
Yes |
| REACH Compliance (251 subst.) |
Yes |
| Soldering |
Reflow |
| Standard Quantity |
Embossed taping 200 pcs |
