LBQNA201616T1R0M | INDUCTORS | TAIYO YUDEN CO., LTD. for Europe

INDUCTORS [Wire-wound Ferrite Power Inductors LBQN/LBQPA series for Telecommunications Infrastructure and Industrial Equipment]

Specifications

Status	Mass Production (Preferred)
Inductance	1.0 uH ± 20 %
Case Size (EIA/JIS)	0806/2016
Rated Current (max)	0.6 A
Saturation Current (max)	0.6 A (⊿L=30%)
Temperature Rise Current (max)	0.72 A (⊿T=20℃)
DC Resistance (max)	117 mΩ
DC Resistance (typ)	90 mΩ
Self Resonant Frequency (min)	100 MHz
Operating Temp. Range	-40 to +105 ℃ (Including-self-generated heat)
Temperature characteristic (Inductance change)	± 20 %
Dimension L	2.0 ±0.2 mm
Dimension W	1.6 ±0.2 mm
Dimension T	1.6 ±0.2 mm
Dimension e	0.5 ±0.2 mm
Measuring Frequency	7.96 MHz
RoHS Compliance (10 subst.)	Yes
REACH Compliance (240 subst.)	Yes
IEC62474 (Ver. D28.00) Compliance	Yes
Halogen Free	Yes
Soldering	Reflow
Standard Quantity	Taping Embossed 2000pcs

Appearance

To Higher Specification

Smaller
Lo-Rdc		Lower
Hi-Curr.

Features

A conductive line is being wound on a core.Rdc is small.

Wound Chip Inductors having wide line-up, which are suitable
for any circuit designs

Main Applications

For Telecommunications Infrastructure and Industrial Equipment

Telecommunications Infrastructure Equipment (e.g., base stations)

Industrial Equipment (e.g., factory automations, industry robots)

They are suitable for an anti-noise measure on the power supply circuit

Note: Please be sure to contact us for further information in advance
when the products are used for automotive electronic equipment.