INDUCTORS  [Wire-wound Ferrite Power Inductors LLQN/LLQPA series for Medical Devices classified as GHTF Classes A or B (Japan Classes I or II)]

제품 사양

Status Mass Production (Preferred)
Inductance 47 uH ± 20 %
Case Size (EIA/JIS) 0603/1608
Rated Current (max) 50 mA
Saturation Current (max) 50 mA (⊿L=30%)
Temperature Rise Current (max) 140 mA (⊿T=40℃)
DC Resistance (max) 3.25 Ω
DC Resistance (typ) 2.5 Ω
Self Resonant Frequency (min) 11 MHz
Operating Temp. Range -40 to +105 ℃
(Including-self-generated heat)
Temperature characteristic
(Inductance change)		 ± 25 %
Dimension L 0.063 ±0.008 inch
Dimension W 0.031 ±0.008 inch
Dimension T 0.031 ±0.008 inch
Dimension e 0.016 ±0.006 inch
Measuring Frequency 2.52 MHz
RoHS Compliance (10 subst.) Yes
REACH Compliance (253 subst.) Yes
Halogen Free Yes
Soldering Reflow
Standard Quantity Taping Embossed 3000pcs
Quantity
이전품번 :
Distributor Quantity Buy
Powered by netComponents

외관

고성능제안

Smaller
Lo-Rdc Lower
Hi-Curr.

특징

Wound Chip Inductors having wide line-up, which are suitable
for any circuit designs

주요 용도

For Medical Devices classified as GHTF Classes A to B (Japan Classes Ⅰ to Ⅱ)

They are suitable for an anti-noise measure on the power supply circuit

제품 자료

스펙 시트
특성 데이터
치수(외형, 권장 랜드, 등)
신뢰성
포장
사용상의 주의
당사제품에 관한 주의사항
Part Number
 

시뮬레이션 데이터

S 파라미터(단품)
S 파라미터(시리즈)[zip]
SPICE 모델(단품)[cir 형식]
SPICE 모델(시리즈)[lib 형식]
SPICE 모델(시리즈)[zip]
3D모델 (STEP)
Land Pattern(DXF)

링크

Download Component Library
Download Simulator for EMC Compornents
Power Inductor Selection Tool
Conditions for measuring S-parameter
Management System Certification Status(ISO, IATF)
Inquiries
Changes to the Part Numbers
 

제품환경증명서

RoHS(Product)
REACH(Product)
The saturation current value is the DC current value having inductance decrease down to 30%. (at 20℃)
The temperature rise current value is the DC current value having temperature increase up to 40℃. (at 20℃)
Please contact our sales staff when ordering or inquiring the details about products on our website.

특성 값 그래프
{{title}}