(Previous Part Number HTK-35V470MF61BN-R2)
AL ELECTROLYTIC CAPACITORS
[Conductive Polymer Hybrid Aluminum Electrolytic Capacitors[HTK] for Automotive Body & Chassis and Infotainment]
| Status | Mass Production (Preferred) |
|---|---|
| Operating Temp. Range | -55 to +125 ℃ |
| Rated Voltage | 35 V |
| Rated Capacitance | 47 uF |
| Tolerance at rated capacitance | ± 20 % |
| Leakage current (max) | 17 uA at 2 min |
| Tangent of loss angle (tanδ) (max) | 0.12 |
| ESR (max) | 60 mΩ at 100kHz / 20 ℃ |
| Rated Ripple (max) | 900 mArms at 100kHz / 125 ℃ |
| Impedance ratio___[-25℃/+20℃] | 1.5 |
| Impedance ratio___[-55℃/+20℃] | 2 |
| Endurance (Applied ripple current) ___[Test time] |
6000 hours at 125 ℃ |
| Endurance___[Leakage current] | The initial specified value or less |
| Endurance___[Capacitance change] | Within ±30% of initial value |
| Endurance___[tanδchange] | 200% or less of the initial specified value |
| Endurance___[ESR change] | 200% or less of the initial specified value |
| Shelf life___Test time | 1000 hours at 125℃ ; Other items are same as the endurance. However, the performance shall be after voltage application treatment (JIS C5101-4). |
| Dimension φD | φ6.3 ±0.5 mm |
| Dimension L | 5.8 ±0.3 mm |
| Dimension A | 6.6 ±0.2 mm |
| Dimension B | 6.6 ±0.2 mm |
| Dimension (C) | 2.7 mm |
| Dimension (P) | 2 mm |
| Dimension W | 0.5 to 0.8 mm |
| Dimension M | 0.4 ±0.3 mm |
| RoHS Compliance (10 subst.) | Yes |
| REACH Compliance (251 subst.) | Yes |
| Soldering | Reflow |
| Standard Quantity | Embossed taping 1000 pcs |